logo

جزئیات محصولات

Created with Pixso. خونه Created with Pixso. محصولات Created with Pixso.
تجهیزات تست ورود آب
Created with Pixso.

IP5X & IP6X Ingress Protection Testing Sand and Dust Test Chamber 1000L

IP5X & IP6X Ingress Protection Testing Sand and Dust Test Chamber 1000L

نام تجاری: Sinuo
شماره مدل: SN441-1800L
مقدار تولیدی: 1
شرایط پرداخت: t/t
توانایی عرضه: 10 مجموعه در هر ماه
اطلاعات دقیق
محل منبع:
چین
گواهی:
Calibration Certificate (Cost Additional)
ابعاد اتاق داخلی:
L1000 × W1000 × H1000mm
ابعاد اتاق بیرونی:
L1450 × W1250 × H2200mm
گرد و غبار درشت:
زیر 150 میلی متر
گرد و غبار ریز:
زیر 75 میلی متر
دمیدن روش گرد و غبار:
از بالا به پایین
مقدار مصرف پودر تالک:
2 تا 5 کیلوگرم مکعب
قطر میش فلزی:
50 ماه
اندازه گیری جریان هوا:
1-20 لیتر در متر
جزئیات بسته بندی:
بسته بندی صادراتی
قابلیت ارائه:
10 مجموعه در هر ماه
توضیحات محصول

 

IP5X & IP6X Ingress Protection Testing Sand and Dust Test Chamber 1000L


 

Complied Standards & Clauses


 
The sand and dust test chamber is designed and manufactured according to IEC60529 Fig 2 IP5X and IP6X, IEC60598-1-2008, IEC60335-1 Clause 22.1 and etc.


Product Overview


 

The Sand and Dust Test Chamber SN441-1000L is specially designed to simulate dust and sand environmental conditions for evaluating the protective performance of electrical and electronic products, automotive and motorcycle components, and sealing parts.
It helps determine the resistance of products to dust ingress, which may affect operation, safety, and durability. The chamber complies with IEC 60529 (IP5X/IP6X), IEC 60598-1, and IEC 60335-1 standards, ensuring accurate and reliable testing results.

This chamber is widely applied in R&D, quality inspection, and industrial certification for products that must perform reliably in dusty or sandy conditions such as outdoor electronics, lighting, automotive systems, and more.

 

Technical Parameters


 

Model

SN441

Working size (mm) L1000 × W1000 × H1000
Outer size (mm) L1450 × W1250 × H2200
Baking dust temperature range RT+10℃ ~ 60℃
Fine dust ≤75 μm
Coarse dust ≤150 μm
Air flow velocity ≤2 m/s
Dust concentration 2 kg/m³
Talcum powder dosage 2–5 kg/m³
Dust blowing method Top to bottom
Air flow meter 1–20 L/min
Negative pressure difference range -10 ~ 0 kPa (adjustable)
Metal mesh diameter 50 μm
Spacing between lines ≤75 μm or ≤150 μm
Shock time 1 s ~ 99 h (adjustable)
Test time 1 s ~ 99 h (adjustable)
Dust blowing cycle 1 s ~ 99 h (adjustable)
Vacuum time 1 s ~ 99 h (adjustable)
Preset test time 0.1 h ~ 9999.9 h
Circulation fan Low-noise alloy centrifugal fan
Load capacity 20 kg
Observation window 1 pc
Lighting lamp 1 pc
Sample power socket Dust-proof AC220V 16A
Control system PLC + Touch Screen
Vacuum system Regulating valve, nozzle, vacuum pump, pipes
Dust heating system Stainless steel mica heating sleeve
Inner chamber material SUS201 stainless steel mirror panel
Outer chamber material A3 iron plate with electrostatic spray finish
Power supply AC380V, 3-phase, 5-wire, 50Hz
Power 3 kW (no load)
Safety protection Phase sequence protection, leakage protection
 

Details


 

IP5X & IP6X Ingress Protection Testing Sand and Dust Test Chamber 1000L 0IP5X & IP6X Ingress Protection Testing Sand and Dust Test Chamber 1000L 1